Pc Monitor Mode; Connecting A Pc; Selecting The Channel Position For The Pc; Settings For The Pc - Grundig LENARO 27 User Manual

VI-D VI-D HDMI HDMI PC-IN PC-IN
Picture
H Position
V Position
Phase
Auto position
Zoom
To Page 1
Select
OK
and edit
28

PC MONITOR MODE

Connecting a PC

Connect the socket »PC-IN« or »DVI-D« on the television to
1
the corresponding socket on the PC using a VGA cable.
2 Connect the socket
PC-DVI PC-DVI
the corresponding socket on the PC using a cinch cable (audio
AUDIO-IN AUDIO-IN
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1024x768, picture frequency 60 Hz).

Selecting the channel position for the PC

1 Press »AV«, select the »PC« or »DVI« channel with »P+« or
»P-« and press »OK« to confirm.

Settings for the PC

1 Press »
– The »MAIN MENU« menu appears.
Select »Picture« with »P+« or »P-« and press »OK« to
2
confirm.
– The »Picture« menu appears.
Select »Brightness« with »P+« or »P-« and press »P+« again.
3
– The second page of the picture menu appears.
Press »P+« or »P-« to select the function or setting.
4
– Options:
Back
Exit
Press »OK« to activate the function and » « or » « to adjust.
5
6 Press »
»PC-DVI AUDIO
i
« to open the »MAIN MENU« menu.
»H Position« – adjust the horizontal picture position
»V Position« – adjust the vertical picture position
»Phase« – removes horizontal flicker, blurring and horizontal
lines
»Auto position« – for automatic adjustment to the PC
i
« to finish the setting.
__________________________
AV 2
AV 1
AUDIO
PC-DVI
V L R ANT IN L R Y Pb Pr DVI-D HDMI PC-IN
AUDIO-IN
AV OUT COMPONENT VIDEO INPUT
AC IN
IN« on the television to