9
Troubleshooting
If no!no! does not start when you glide it on the skin:
•
Press the On/Off button again to make sure it is turned on.
•
Make sure the unit is charged.
•
Check the LCD screen while gliding. If no blocks appear,
replace the Thermicon™ Tip.
•
Make sure the Thermicon™ Tip is not bent or torn.
Replace it if necessary.
If the signal light turns red while you glide no!no! on your
skin:
•
Replace the Thermicon™ Tip
If the device is not working properly, contact your point of
purchase for examination or repair. The no!no! warranty
is only valid if no!no! has been used according to the
instructions in this guide. Retain all receipts and original
packaging.
Technical Information
Technical Specifications:
•
Weight: 104gr
•
Physical Dimensions: 120 X 40 X 25mm (4.7 X 1.6 X 1.0 in)
•
Mode of Operation: Continuous
Operating Conditions:
•
Temperature: 5° C-30° C
•
Humidity: 30%-80% RH
•
Power Supply/Battery Charger Rating:
Input 100-240VAC/50-60Hz. 0.2AOutput 8.4VDC 0.5A
Transport and Storage
•
Temperature: -20° C to 80° C
•
Humidity: 05-95% RH
•
Atmospheric pressure: 0.1-1.5 atm.
Electrical Safety:
•
Power Supply:
Class II equipment – double insulation
•
This appliance is not suitable for use in the presence of
flammable anesthetic mixture with air or with oxygen or
nitrous oxide.
•
The Quality Management System of Radiancy Ltd.
complies with the Quality Management Standard ISO
13485.
•
no!no! complies with IEC 60335 and with Low Voltage
Directive (Electric Safety) LVD: 2006/95/EC
•
Design and technical specifications are subject to change
without notice.