switel i-700 Quick Manual

The Phone Layout
Handset
Earpiece
Navigation
keys
Select key
iPhone key
i-700
Charging pins
Base
Charging cradle
(for DECT)
Quick Guide
Bluetooth LED
Key Functions
LCD Screen
(1.8 inches)
Loudspeaker
Back key
Speaker key
Battery
compartment
cover
Microphone
Charging cradle
(for iPhone)
Paging key
(Find Handset)
Charging
DECT Phone & iPhone
Press to enter # or to switch between upper case and
lower case letters in the English mode.
Before initial operation, fully charge the
DECT phone for 15 hours or more.
Press and hold to turn on or off the keypad lock function.
To charge the DECT phone or iPhone,
Select keys: Press to perform the function listed above
simply place it on the base.
the key.
Press to turn on the phone. If you press and hold, the
Notes:
phone turns off. While navigating through menus,
briefly press it to cancel your input and return to the
When charging, the bars in
main screen. During a call, briefly press it to end the
call. You can adjust the visual angle of the iPhone according to
your needs (from 30 degrees to 75 degrees).
Press to place and answer landline calls.
Press to place and answer iPhone calls.
Turning On or Off the Phone
Press to activate the speakerphone for handsfree
When you place the handset (DECT phone) on the base, it
operation during a call.
automatically turns on.
Press to scroll up or down when browsing menus.
To turn on the handset
In standby mode:
Left: Press to place an internal call.
To turn off the handset
Right: Press to review outgoing calls list.
Up: Press to view incoming calls list.
Down: Press to review contacts.
Note:
During use:
Nothing appears on the screen when the battery power is
Up: Increases earpiece volume.
very low. Fully charge the handset before use.
Down: Decreases earpiece volume.
Bluetooth
Pairing with an iPhone
Turn on the Bluetooth feature of your iPhone. For example, for
an iPhone4, click
the iPhone searches for available devices.
Menu
And ,
Select
scroll.
Select Add device
,
When the iPhone finds i-700, click
with the base. When the iPhone is successfully connected,
Connected displays.
(when it's off), press .
, press until " Goodbye! " appears.
Settings General Bluetooth , , and OFF , then
Open the menu.
Bluetooth
Select the Bluetooth menu.
The LCD shows Please wait... , and
the Bluetooth LED flashes.
Not Paired to connect it