Chevrolet 2012 Sonic Owner's Manual page 124

5-26 Instruments and Controls
Remaining Oil Life
Press MENU to show the remaining
oil life display. This display shows
an estimate of the oil's remaining
useful life. If 99 % is displayed,
that means 99% of the current oil
life remains.
When the remaining oil life is low,
the Code 82 message will appear
on the display. The oil should be
changed as soon as possible.
See Engine Oil on page 10 9. In
addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in
the Maintenance Schedule. See
Maintenance Schedule on
page 11 3.
Remember, the oil life display must
be reset after each oil change.
It will not reset itself. Also, be
careful not to reset the oil life
display accidentally at any time
other than when the oil has just
been changed. It cannot be reset
accurately until the next oil change.
To reset the engine oil life system,
press the SET/CLR button while the
oil life display is active. See Engine
Oil Life System on page 10 12.
Units
Press MENU to show the unit
display. Press SET/CLR and
move to change units when
UNIT SET is displayed. Press
SET/CLR to confirm the setting. You
will have to select 1, 2, or 3 for the
unit display. 1 is Imperial units, 2 is
US units, and 3 is metric units. This
will change the displays on the
cluster and DIC to the type of
measurements you select.
Language
Press MENU to show the language
display. Press SET/CLR and
move to change the language
of the displays when LANG SET
is displayed. You will have to
select 1 or 2 for the language
display. 1 is Alphabet and 2 is
Arabic Numeral. Press SET/CLR to
confirm the setting.
Tire Learn
Press MENU to show the tire learn
display. This display allows for
matching of the TPMS sensors. See
Tire Pressure Monitor System on
page 10 46 and Tire Pressure
Monitor Operation on page 10 47.