Samsung Galaxy S 4G User Manual page 177

Network Notification
By default, when Wi-Fi is on, you receive notifications in the
Status bar anytime your phone detects an available Wi-Fi
network. You can deactivate this feature if you do not want to
receive notifications.
Press
1.
Wireless and networks
Tap Network notification. A check mark displayed next to
2.
the feature indicates Network notification is active.
Tap Network notification again to remove the check mark
3.
and deactivate this feature.
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
and then tap (Settings)
Wi-Fi settings.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
Press
1.
Wireless and networks
Tap WPS button connection.
2.
Press the WPS button on your Wi-Fi access point within 2
3.
minutes.
Manually Adding a Wi-Fi Network
Press
1.
Wireless and networks
Tap Wi-Fi to turn it on.
2.
Tap Add Wi-Fi network.
3.
Enter the SSID (Service Set Identifier) and Security settings
4.
then tap Save.
Note: An SSID is a unique key which identifies a wireless LAN. Its purpose is
to stop other wireless equipment from accessing your LAN — whether
accidentally or intentionally. To communicate, wireless devices must
be configured with the same SSID.
Mobile AP
For more information, refer to "Mobile AP" on page 165.
and then tap (Settings)
Wi-Fi settings.
and then tap (Settings)
Wi-Fi settings.
Changing Your Settings 172