How To Setup And Secure The Dpc 3925 Docsis 3.0 Cable Modem - Cisco DPC 3925 Quick Start Manual

How to Setup and Secure the DPC 3925
DOCSIS 3.0 Cable Modem
Power
Adapter
Home Telephone Wiring
Line 2
Home Telephone Wiring
Line 1
1. Before setting up the DPC3925 Cable modem, please ensure it is turned
off. Connect the RF coaxial cable from your service provider to the coaxial
connecter labeled "CABLE" on the back of the DPC3925 Cable modem.
2. Connect your PC to the DPC3925 Cable modem using the following
method.
• Ethernet Connection: Locate the yellow Ethernet cable, connect one
end of the Ethernet cable to the Ethernet port on your PC, and connect
the other end to one of the four yellow ETHERNET ports on the back of
the DPC3925 Cable modem.
• WiFi Connection: By default, WiFi access is enabled with WiFi security
disabled. The default SSID Name is the last 6 characters of the CM MAC
Address. The CM MAC Address can be found on the label attached to
the DPC3925 Cable modem or the packaging box.
Note: If your DPC3925 Cable modem comes with a USB port, please note
that all USB functions in the USB port are currently disabled.
Ethernet
Cable
PCs