Basic Connection - Panasonic TC-P58V10 Operating Instructions Manual

Accessories/Optional Accessory
Reference of connection
Antenna terminal Pin terminals
red
Match colors of plugs and terminals.
Firmly tighten by hand.
Insert firmly.
10
(Continued)
AC cord connection
To attach To remove
Keep pushing both
side snaps and pull
down
Insert it firmly until the
tabs on both sides click
into place.
HDMI terminal
blue green
green
Insert firmly.

Basic Connection

Example 1
Connecting Antenna (To watch TV)
TV
VHF/UHF Antenna
•
VHF/UHF Antenna NTSC (National Television System Committee):
Conventional broadcasting
•
ATSC (Advanced Television Systems Committee):
Cable TV
Digital TV Standards include digital high-definition television
(HDTV), standard-definition television (SDTV), data broadcasting,
multi-channel surround-sound audio and interactive television.
To connect the antenna terminal and Cable Box
VHF/UHF Antenna
Cable TV
or
Back of the TV
1
COMPONENT
(If no Cable Box)
IN
2
or
VIDEO
1
IN
RS232C RS232C
Cable Box/Cable
•
You need to subscribe to a cable TV service to enjoy viewing their
ANT IN ANT OUT
programming.
•
If using a Cable Box set the TV channel to CH3 or CH4 for regular cable.
•
You can enjoy high-definition programming by subscribing to a high-
definition cable Service.
The connection for high-definition can be done with the use of HDMI or
Component Video cable. (p. 14)
•
Cable Box
To view high-definition programming select the correct video input. (p. 26)
Note
Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment's connections, please refer to the operating manuals for the equipment.
When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.
For additional assistance, visit us at: www.panasonic.com
www.panasonic.ca
AC 120 V
60 Hz
AC Cord
(Connect after all the
* See page 10
other connections
(AC cord
have been made.)
connection)
HDMI 1 HDMI 1 HDMI 2 HDMI 2 HDMI 3 HDMI 3
11