Globe GG15G Instruction Manual page 2

Gas Griddle
Conversion Kit Instructions
CONVERSION
Instructions are for conversion from Natural Gas to Propane (L.P.) on all models. The conversion should be
done before connecting the unit to the gas supply. Units are shipped from the factory equipped for use on
natural gas. Parts necessary for L.P. (liquid propane) are provided with the unit. Turn off the main gas supply
before doing any maintenance. (Use only factory supplied regulator!)
1. Remove the knobs and front panel to help
with access.
2. Unscrew bolts and pilot valve, then
remove the manifold.
NAT
3. Replace the orifi ce fi ttings into the valve.
Note: Unit Number on side of orifi ce
fi ttings.
4. Replace the front panel and knobs
Pg 2 of 4
(Manually Controlled)
Do not attempt gas conversion by yourself. Gas conversion of your unit is to be
made by a certifi ed/licensed technician. Locate an authorized Globe servicer at
www.globefoodequip.com or call 800-347-5423.
L.P.
Rev. C
5. Before installing the included convertible
regulator, unscrew the octagon cap. You can read
(NAT) on the plastic insert attached to the head of
the cap; fl ip it over and snap back in place.
Pictured is
the plastic
insert. Pull
off insert
from octagon
cap and
reverse the
plastic insert
position so
that the L.P.
position is
attached to
the octagon
cap head.
L.P. Position
of insert.
Regulator
is now
converted to
L.P.
6. Continue with installation.
O:\Service\Public\service bulletins\999240 Gas Conversion Manual Griddle
Convertible
regulator with
octagon cap.
Unscrew from
regulator.
L.P.
L.P. Position