Advertisement
B
Connections Adding Other Equipment /
Amplifier /
You can connect an amplifier to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so
that it can be controlled through this unit.
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker
leads of this unit unused.
L
R
Signal cord (not supplied for this unit)
3
*
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place not
coated with paint (if coated with paint, remove the paint before attaching the wire). Failure to
do so may cause damage to the unit.
PRECAUTIONS on power supply and speaker connections:
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the
unit will be seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker
wiring in your car.
+
+
L
-
-
+
+
R
-
-
Rear speakers
INPUT
L
JVC Amplifier
R
OUT
LINE
L
L
L
KD-G207
R
R
R
REAR FRONT
Front speakers
•
•
Remote lead
*
3
Remote lead (Blue with white stripe)
3
*
•
•
+
+
L
-
-
+
+
R
-
-
4
Y-connector (not supplied for this unit)
To the remote lead of other equipment or automatic antenna if any
+
L
-
+
R
-
+
-
+
-
Advertisement
