Related Manuals for Contec DS-280H Series
Summary of Contents for Contec DS-280H Series
- Page 1 Digital Signage Player Athlon X2 2.8GHz, SSD, POSReady7, HDMIx4 DS-280H Series User’s Manual CONTEC CO.,LTD.
- Page 2 Check Your Package Thank you for purchasing the CONTEC product. The product consists of the items listed below. Check, with the following list, that your package is complete. If you discover damaged or missing items, contact your retailer. Product Configuration List...
-
Page 3: Copyright
No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this document. -
Page 4: Table Of Contents
Limited One-Year Warranty ........................2 How to Obtain Service..........................2 Liability ..............................2 Safety Precautions ........................... 3 Safety Information ........................... 3 Caution on the DS-280H Series ...................... 3 SYSTEM REFERENCE Specification ............................5 Physical Dimensions ..........................6 HARDWARE SETUP Before Using the Product for the First Time..................7 Hardware Setup ............................ - Page 5 OnChip Azalia Device...........................26 USB Device setting ..........................27 Power Management Setup........................28 PNP/PCI Configurations ........................29 PC Health Status ............................30 Frequency/Voltage Control ........................31 Defaults Menu............................32 Supervisor /User Password Setting .......................33 Exit Selecting ............................34 APPENDIX Battery ..............................35 LIST OF OPTIONS DS-280H Series User’s Manual...
-
Page 6: Introduction
The installed OS is already equipped with a Runtime module which is required on OS side to trip Kinect for Windows sensor.You can use this product as an application controller which is equipped with NUI (Natural User Interface ) that features a control with voice or gestures. Supported OS Windows Embedded POSReady7 DS-280H Series User’s Manual... -
Page 7: Customer Support
You can download updated driver software and differential files as well as sample programs available in several languages. Note! For product information Contact your retailer if you have any technical question about a CONTEC product or need its price, delivery time, or estimate information. Limited One-Year Warranty CONTEC products are warranted by CONTEC CO., LTD. -
Page 8: Ac Adapter
CAUTION indicates a potentially hazardous situation which, if not avoided, may CAUTION result in minor or moderate injury or in property damage. Caution on the DS-280H Series Handling Precautions DANGER This product supports an attached AC adapter and AC cable only. - Page 9 Avoid installation in a location where people may come into contact with the case. CONTEC does not provide any guarantee for the integrity of data on any recording media such as SSD.
-
Page 10: System Reference
Floating dust particles Not to be excessive Corrosive gases None *1: Clone display between port 1, 2 (HD3200) and port 3, 4 (E4690) is not available. This product are designed to use under the good condition. DS-280H Series User’s Manual... -
Page 11: Physical Dimensions
2. System Reference Physical Dimensions Figure 2.1. Physical Dimensions DS-280H Series User’s Manual... -
Page 12: Hardware Setup
* Before using this product, be sure to execute "LOAD SETUP DEFAULTS" to initialize the BIOS settings to their default values. (See Chapter 5, "Main Menu.") CAUTION Be sure to connect the keyboard and mouse to it before turning the power on for the first time. DS-280H Series User’s Manual... -
Page 13: Hardware Setup
Ensure the installer uses four M3 length 8mm screws to secure the system on wall. Fasteners are not included with the unit, and must be supplied by the installer. The types of fasteners required are dependent on the type of wall construction. DS-280H Series User’s Manual... -
Page 14: Each Component Function
Disk access display LED HDMI(E4690/HD3200) Display(HDMI x4) USB port connector x2 LINE IN Line in (3.5φ PHONE JACK) LINE OUT Line out (3.5φ PHONE JACK) Ethernet 1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector COM1 / COM2 Serial port RJ-45 connector x2 DS-280H Series User’s Manual... -
Page 15: Component Function
A line in connector is provided. You can plug a microphone to this connector for sound input. Line out Interface: LINE OUT A line output connector is provided. You can plug a headphone or amplifer-integrated speakers into this connector. DS-280H Series User’s Manual... -
Page 16: Giga Bit-Ethernet: Lan A - B
100BASE-T 1000BASE-T TRD+(0) TRD-(0) TRD+(1) N.C. TRD+(2) N.C. TRD-(2) TRD-(1) N.C. TRD+(3) N.C. TRD-(3) LEDs for display of network statuses: Right LED: Link LED Opertion: Green Blinking Left LED: Operation LED 10M, 100M: Green, 1000M: Orange DS-280H Series User’s Manual... -
Page 17: Serial Port Interface : Serial Com1/Com2
Request to send Data terminal ready Transmit data ground Data carrier detect Receive data Data set ready Clear to send CAUTION Do not Insert LAN Cable into Serial Port. This product may malfunction or cause a failure. DS-280H Series User’s Manual... -
Page 18: Bios Setup
: Exit Current page to the next higher level menu Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Enter> key. DS-280H Series User’s Manual... -
Page 19: In Case Of Problems
Even a seemingly small change to them has the potential for causing you to be repaired. A Final Note About Setup The information in this chapter is subject to change without notice. DS-280H Series User’s Manual... -
Page 20: Main
▶Integrated Peripherals Set Supervisor Password ▶Power Management Setup Set User Password ▶PnP/PCI Configurations Save & Exit Setup ▶PC Health Status Exit Without Saving ↑↓←→ : Select Item Esc : Quit F10 : Save & Exit Setup DS-280H Series User’s Manual... -
Page 21: Standard Cmos Features
To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/- key to set the current time. The time format is: Time Hour: 00 to 23 Minute: 00 to 59 Second: 00 to 59 DS-280H Series User’s Manual... - Page 22 The system boot will not be halted for a disk error; it will stop for all other errors. All, But Disk/Key: The system boot will not be halted for a key- board or disk error; it will stop for all others. DS-280H Series User’s Manual...
-
Page 23: Advanced Bios Features
This allows you to activate the NumLock function after you power up the system. This field allows you to select how Gate A20 is worked. Gate A20 is a device used Gate A20 Option to address memory above 1 MB. DS-280H Series User’s Manual... - Page 24 This option allows the system to access greater than 64MB of DRAM memory when OS Select for DRAM > 64MB used with OS/2 that depends on certain BIOS calls to access memory. The default setting is Non-OS/2. HDD S.M.A.R.T. Capability By default, this field is disabled. DS-280H Series User’s Manual...
-
Page 25: Advanced Chipset Features
Enabled and Disabled. The setting of Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, System BIOS Cacheable resulting in better system performance. However, if any program writes to this memory area, a system error may result. DS-280H Series User’s Manual... -
Page 26: Pcie Configuration
[Press Enter] ▶ NB-SB Port Features [Press Enter] ↑↓←→ : Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1:General Help F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults DS-280H Series User’s Manual... -
Page 27: Igx Configuration
↑↓←→ : Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1:General Help F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults Item Explanation The settings for IB828 are Disabled and UMA; while the IB828 has additional settings Internal Graphics Mode of Sideport and UMA+sideport. DS-280H Series User’s Manual... -
Page 28: Integrated Peripherals
Onboard Serial Port Serial Port 1: 3F8/IRQ4 Serial Port 2: 2F8/IRQ3 This field sets the system power status whether on or off when power returns to the PWRON After PWR-Fail system from a power failure situation. DS-280H Series User’s Manual... -
Page 29: Onboard Devices
Item Help Onboard Lan Boot ROM [Disabled] ↑↓←→ : Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1:General Help F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults DS-280H Series User’s Manual... -
Page 30: Onchip Sata Device
OnChip SATA Type [IDE] Combined Mode [Disabled] ↑↓←→ : Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1:General Help F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults DS-280H Series User’s Manual... -
Page 31: Onchip Azalia Device
OnChip Azalia Device HD Audio Azalia [Enabled] Item Help ↑↓←→ : Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1:General Help F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults DS-280H Series User’s Manual... -
Page 32: Usb Device Setting
*** USB Mass Storage Device Boot Setting *** ↑↓←→ : Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1:General Help F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults DS-280H Series User’s Manual... -
Page 33: Power Management Setup
RTC and is often used to synchronize multimedia streams, providing smooth playback and reducing the need to use other timestamp calculations such as an x86 CPU’s RDTSC instruction. DS-280H Series User’s Manual... -
Page 34: Pnp/Pci Configurations
PCI latency refers to the number of cycles that any device can hold an IRQ before it PCI Latency is disconnected. Maximum Payload Size The default setting of the PCI Express Maximum Payload Size is 4096. DS-280H Series User’s Manual... -
Page 35: Pc Health Status
The values are read-only values as monitored by the system and show the PC health status. This field enables or disables the smart fan feature. At a certain temperature, the Smart Fan Temperature fan starts turning. Once the temperature drops to a certain level, it’s turn low speed. DS-280H Series User’s Manual... -
Page 36: Frequency/Voltage Control
F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults Item Explanation This field sets the value of the spread spectrum. The default setting is Disabled. Spread Spectrum This field is for CE testing use only. DS-280H Series User’s Manual... -
Page 37: Defaults Menu
When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load setup Defaults (Y/N) ? N Pressing ‘Y’ loads the default values that are factory settings for optimal performance system operations. DS-280H Series User’s Manual... -
Page 38: Supervisor /User Password Setting
You determine when the password is required within the BIOS Features Setup Menu and its Security option. If the Security option is set to “System”, the password will be required both at boot and at entry to Setup. If set to “Setup”, prompting only occurs when trying to enter Setup. DS-280H Series User’s Manual... -
Page 39: Exit Selecting
Pressing <Enter> on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setup without storing in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your computer. DS-280H Series User’s Manual... -
Page 40: Appendix
- Lithium content : 1g or less Removing the battery Remove the battery according to the following figure. Figure 6.1. Removing the battery Disposing the battery Dispose the removed battery properly as instructed by local government. DS-280H Series User’s Manual... - Page 41 6. Appendix DS-280H Series User’s Manual...
-
Page 42: List Of Options
7. List of Options List of Options Display cable only for HDMI input IPC-HDMI-015 HDMI Cable (1.5m) * Please check our website in order to know the latest information about our options. DS-280H Series User’s Manual... - Page 43 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan Japanese http://www.contec.co.jp/ English http://www.contec.com/ Chinese http://www.contec.com.cn/ No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. [12212012] [12212012] Management No. NA02209 Parts No. LYPQ381...
Need help?
Do you have a question about the DS-280H Series and is the answer not in the manual?
Questions and answers