Intertek Pinnacle PB150 Installation & Operator's Manual page 28

Pellet/corn boiler
Table of Contents

Advertisement

PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
Symptoms of Poor Fuel:
1. Unburned pellets
2. Fire pot overflows as a result of high moisture content.
3. Lack of heat.
4. Excessive ash build-up.
5. Incorrect size.
Let auger run for one minute. Tighten screws. Auger should
realign itself. Possible build up of carbon on end of auger where it
enters burn pot.
Decrease in heat output
Thoroughly clean heat exchanger. Did you start using
different fuel? Shutter on draft fan moved?
OPERATOR RELATED PROBLEMS
Feed system does not lock in.
Repeat start up using more fuel.
Boiler will not start up after power outage.
Check manual reset on feed system.
Boiler will not feed fuel.
Check for blockage in metering cup.
Is there fuel in the hopper?
FUEL RELATED PROBLEMS
27

Advertisement

Table of Contents
loading

Table of Contents