Related Manuals for LAUER EPC PM 2100
Summary of Contents for LAUER EPC PM 2100
-
Page 1: User Manual
User manual EPC PM 2100 EPC PM 1700 EPC PM 1500 EPC PM 1200 EPC PM Box CiS-Nr.: 360.610.0110 Reg 10508/0605 Version 2/09.05 © Elektronik-Systeme LAUER GmbH & Co. KG... - Page 2 The above terms in this documentation can be brands, whose use by third parties can breach the rights of the proprietor. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 3: User Tips
The test and aptitude of the intended usage by the user res. the usage under operational conditions is the responsibility of the user. Therefore Elektronik-Systeme LAUER does not assume liability. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 4 LAUER GmbH & Co. KG. The efficient and safe operation of the appliance presupposes appropriate transport, storage, assembly and installation as well as accurate handling and maintenance. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 5: Table Of Contents
EPC PM 1500 ............45 5.1.2 EPC PM 1700 ............47 5.1.3 EPC PM 2100 ............49 5.1.4 EPC PM Box ............51 © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 6: Preamble
... not only demo-appliances but also specialists who will personally ass- ist you when you first take your appliance into operation. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 7: Certificates And Guide Lines
Your distribution agent can make these available on demand. Assembly directives Please note the assembly directives and safety instructions mentioned © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 8 © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 9: Preparation
EPC PM 1700 - 14 nuts with toothed washers and plain washers EPC PM 2100 - 14 nuts with toothed washers and plain washers © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 10: Preparation
After removing the appliance from the parcel, lay the parts on a suitable clean and open surface (for example a table. Workbench etc.). Follow exactly the instructions described in the following chapters. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 11: Description
Description 2.1 Installation The installation of the PPC is independent of the display size, shown as follows: 1 Frontunit 2 PC-unit © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 12: Display
Touch or keyboard and Touch. Pure Touch variants available in 12", 15", 17"and 21" Touch/key variants available in 10“ and 15“ © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 13: Ports
Description 2.3 Ports 24 V panel © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 14 Description 230 V panel © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 15: Motherboard - Slots, Memory Module
(earth) have to be considered during assembly/ disassembly. ESD-protective measures to be considered when opening and working on the appliance. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 16 Description © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 17: Putting In To Operation
The power supply is carried out via a double-pole connector (Phoenix MST BT 2,5/2). Supply build up 230 VAC + 24 V 230 VAC 24 V DC © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 18: Earthing System
• The earthing connection is to be carried out with min. 4 mm² cross section. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 19: Assembly
Protection class IP65 to the front panel is only guaranteed with a perfect fitting seal. Pay attention to the torque when fixing the front panel! © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 20: Operating System
Touch or display driver can be started over the provided drivers - CD, (driver folder). Further details to the individual driver installations you will find in following chapters. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 21: Bios-Settings
Select the menu item „Load Optimised Default“ and affirm the selected operation. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 22 Integrated Peripherals/ Super IO Device Serial Port 3 Use IRQ IRQ4 Integrated Peripherals/ Super IO Device Serial Port 4 Use IRQ IRQ3 © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 23: Important Items Regarding Software Installation
Start i.e. Emergency discs. These might be needed to restore an operational system. Additionally you should make backup copies of your own data and applications! © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 24: Touch Installation 6.10 Windows 2000 / Xp
IRQ 4 • 9600 bps Carry out the SETUP.EXE under • drive E:\Driver\Driver-EPC-PM\Touch\Touch (with the ordered operation system) • CD-ROM: (D:) E:\EPC-PM\Touch © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 25 Putting in to operation • follow the instructions on the monitor. press [CONTINUE]. • accept the license provisions © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
- Page 26 Putting in to operation • select the „Auto detect Function“ or manually select the technical connection data. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
- Page 27 „Hampshire Control Panel“. • Calibrate the touch screen with your finger or with a rounded pointed touch pen. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 28: Graphic Board Installation
After conclusion the installation and restart the PPC the following entries can be seen in the Control Panel or in the display properties. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 29: Installation Lan-/Network Card
„connection PING“. Herewith you can then test your connections to the server and other PC’s. (for example: C:\ping 192.168.5.100). © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 30 Putting in to operation © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 31: Service
Therefore cautionary measures have to be taken from the moment the appliance is opened. These can be consulted in the guidelines for electrostatic endangered components (EGB-guidelines). © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... -
Page 32: Changing The Fan
To open the enclosure remove the marked screws with an Allen key. Then lift the enclosure and pull out the fan cable. Danach den Deckel anheben und das Lüfter-Kabel herausziehen. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 33 Remove the protective cover of the fan and remove the fan with a Phillips head screw driver. After changing the fan, assemble the appliance in the reverse order. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 34: Pci-Board Installation
To open the enclosure remove the marked screws with an Allen key After removing 7 screws the enclosure can be lifted easily. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 35 A look at the opened appliance shows the 2 PCI-slots and the board holder. Remove the slot cover of the desired slot to insert your PCI-board. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
- Page 36 Unscrew the board holder. Insert your PCI-board. Please ensure a correct fit at the lower edge of the slot. Screw your PCI-board tight. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
- Page 37 Following picture shows this once more in detail. The short support can be removed with boards of the same design. Otherwise the two supports can be individually adjusted. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 38: Memory Expansion, -Change
Please note the correct location of the cable prior to pulling the cable out so that it can be plugged in correctly. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 39 If a memory expansion is carried out the memory module is positioned vertically and pushed in, the fixing brackets snap shut. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
- Page 40 Bend back and plug in the ribbon cable. Subsequently plug in the fan cable and reposition the enclosure. Re-fix the enclosure. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 41: Technical Data
0,8A max. (Switch on peak 30A) Options CD Slimline drive CD Brenner Slimline drive DVD Slimline drive DVD Brenner Slimline drive © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 42 --> does not apply with CD/DVD drive assemblies in the enterprise Shock in the enterprise 15 g, 11 ms, halb Sinus for EN60068-2-27 © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 43: Detailed Drawings
Type of mounting with 8 pieces into the front plate pressed in thread pin M4 x 16. Max. 5 mm thick mounting frame © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 44 Technical data view of the appliance’s underneath lateral view Appliance’s rear view lateral view View of the equipment top side © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 45: Epc Pm 1500
Type of mounting with10 pieces into the front plate pressed in thread pin M4 x 16. Max. 5 mm thick mounting frame © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 46 Technical data view of the appliance’s underneath lateral view Appliance’s rear view lateral view View of the equipment top side © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 47: Epc Pm 1700
Type of mounting with14 pieces into the front plate pressed in thread pin M4 x 16. Max. 5 mm thick mounting frame © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 48 Technical data view of the appliance’s underneath lateral view Appliance’s rear view lateral view View of the equipment top side © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 49: Epc Pm 2100
Type of mounting with14 pieces into the front plate pressed in thread pin M4 x 16. Attachment with 14 pieces of nuts. Max. 5 mm thick mounting frame. © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 50 Technical data view of the appliance’s underneath Rear view of the appliance lateral view © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...
-
Page 51: Epc Pm Box
Technical data 5.1.4 EPC PM Box view of the appliance’s underneath Rear view of the appliance lateral view © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103... - Page 52 © Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103...