Quick Start; Getting Ready - JD C 3.1 Li User Manual

3. Quick Start

• Please install the camera driver before using your camera with a PC.
• Best way to transfer picture to PC is using the PC-DISK (Mass Storage)
mode to copy all your pictures.
• You need to charge the lithium battery before using the camera for the
first time.

• Getting Ready

1.Open the battery compartment cover.
2.Load the battery and the SD card (Optional)
into the camera.
3.Close the battery compartment cover.
4.Connect USB Data Cable with PC and digital
camera to charge the Battery.
5.The charging is complete when the recharge
lamp turns from red to green. (It takes about
two hours to achieve a full charge.)
CAUTION
- 3 -