Operating System Requirements - UVP DigiDoc-It Set Up And Operating Instructions Manual

DigiDoc-It Imaging System
Camera & UV Filter
The digital color camera (DigiCam photo below – actual camera may be different) includes a built-in optical zoom
lens.
The EtBr filter, orange-colored UV blocking band pass filter, is installed inside the hood at the UVP factory. The
filter is used to absorb UV and IR radiation from the transilluminator and to enhance the orange/pink bands
generated by Ethidium Bromide stained gels. The filter can be removed when imaging non-fluorescent media
(protein gels, colony plates, etc.) in order to produce brighter images.
Doc-It®LS Acquisition Software
The Doc-ItLS software loads onto the user's existing computer.
The software controls the camera acquisition functions as well as
enhancement and reporting features. For information on
installation and use of the software, refer to the Doc-ItLS
Software Manual (pdf file on the software CD).
Transilluminator
An UV transilluminator may be shipped with the system. The transilluminator includes an ultraviolet blocking
cover and the cover should be removed when the transilluminator is used with the system.

Operating System requirements


Windows 2000 with Service Pack-4 or higher

Windows XP Professional with Service Pack-2 or higher

Internet Explorer 6.0 or higher [To locate the version of Internet Explorer, open Internet Explorer and
click on Help->About Internet Explorer]

Intel Pentium Processor or equivalent, 1.6 GHz or higher

1 GB of RAM or greater

200 MB of available hard disk space for the program, more for data

CD-ROM drive

One Universal Serial Bus (USB) for connecting the camera

Color monitor, supporting at least 1024 x 768 resolution and 16-bit or better colors; 24-bit or 32-bit color
is strongly recommended
NOTE: For 21 CFR Part 11 support functionality, the computer partition must be formatted with NTFS. Refer
to the Doc-ItLS software manual for instructions.
Capture software
2