The Martin logo, the Martin name and all other trademarks in this document pertaining to services or products by Martin Professional A/S or its affiliates and subsidiaries are trademarks owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.
Thank you for purchasing the Martin M1 Lighting Control System. M1 is the next generation of Martin Controllers. With the full power of a larger desk and the agility of a small one, it is the ultimate all-in-one lighting console.
This product is for professional use only. It is not for household use. It presents risks of lethal or severe injury due to electric shock. Read this user manual before powering or installing the M1 , follow the safety precautions listed below and observe all warnings in this manual and printed on the product.
Included Items Each Martin M1 contains the following items: M1 Contoller 1.5 m (4.9 ft.) power cable, 3-pin IEC P/N 11501012 (for use outside the US and Canada) 1.5 m (4.9 ft.) power cable, 3-pin IEC P/N 11501502 (with NEMA 15-5P plug for use within...
The M1 should never be shipped in any other container than the factory-provided box or a custom manufactured protective case. Placement The M1 controller requires a stable mounting position that provides support for all 4 rubber feet on the bottom of the console. Place the console carefully onto the surface and fold open the attached screen.
Service The Martin M1 is designed as a rugged, roadworthy device. Occasional cleaning is the only service required of the user. For any other service-related concerns, please contact your Martin dealer or visit www.martin.com. Any service not described in this User Manual must be carried out by a qualified Martin technician.