Table of Contents
Advertisement
Time Triggers
The PS02/PS06/PS18 has real time triggering of the internal Looks.
1
From Home, use the slide pad to access Time Triggers.
2
Press Enter and display shows the Day, Hour and Minutes and Look.
3
Press Enter then use the slide pad to toggle between Day, Hour (24), Minutes and Look to be triggered.
4
Press Enter and hold for 2 seconds to save.
By default Time Triggers will occur on all 7 days unless specified. The triggers will only be activated when the feature "When DMX is Lost" is
set to Trig.
Set Day and Time
1
From Home, use the slide pad to access Set Day and Time.
2
Press Enter and use the slide pad to toggle between Day, Hour (24) and Minutes.
3
Press Enter and hold for 2 seconds to save.
Displ. Backlight
The LCD backlight can be set to go off after 5 seconds of no activity.
1
From Home, use the slide pad to access Displ.Backlight.
2
Press Enter, then use the slide pad to select On (permanently) or Off (after 5 seconds).
3
Press Enter and hold for 2 seconds to save.
Reset to Default
1
From Home, use the slide pad to access Reset to Default.
2
Press Enter and hold for 2 seconds to reset all menu items to factory defaults.
Factory defaults are:
DMX address = 001
Control Mode = 1
DMX Lost = Hold
Looks = 1
Time Triggers = deleted
Display = On.
Frequency
The PS02/PS06/PS18 has four frequency settings available – 360, 600, 1200, 2400. This allows for the LED scan rate to be
synchronised with the video camera and avoid a flickering effect.
1
From Home, use the slide pad to access Frequency.
2
Press Enter, and then scroll to select the frequency.
3
Press Enter and hold for 2 seconds to save.
Color Span 2 User Manual
www.chroma-q.com
14
V1.1 October 2014
Advertisement
Table of Contents
