Chroma Color Span 2 User Manual page 14

Low profile ultra bright led cove lighting and wall wash system
Hide thumbs Also See for Color Span 2:
Table of Contents

Advertisement

Look Store
The PS02/PS06/PS18 has 42 internal FX Looks for standalone operation, 1-9 are preset.
To replay a Look,
1
From Home, use the slide pad to access Look Store.
2
Press Enter then scroll through the Looks.
Note: DMX has priority over internal Looks.
Looks can be recorded to the internal flash memory by users and will be preserved on power down. However, looks will be returned to
default setting if menu Reset to Default is performed.
There are two ways to record a look:
Simple, with DMX console.
1
Set the Control Mode of the PS02/PS06/PS18 to Lk Sel.
2
Use a DMX console to adjust channel levels and create the desired look or effect.
3
From Home, use the slide pad to access Look Store.
4
Press Enter, and then scroll to the desired Look number.
5
Press Enter, and then press Enter again and hold for 2 seconds to save the Look.
Advanced, standalone. (DMX is unplugged)
1
Use the slide pad to access Look Store.
2
Press Enter then scroll to the desired Look.
3
Press Enter to access the memory data. The memory data is presented as two numbers separated by a letter "c". The number to
the left of the "c" is the channel number and to the right is the channel level. Pressing Up/Down up to the far end will show the
Mode at which the selected Look was programmed.
To edit the Mode of a selected Look:
1
Use the slide pad to access Look Store.
2
Press Enter then scroll to the desired Look.
3
Press Enter to access the memory data.
4
Scroll to the far end until the Mode number is shown.
5
Press Enter then scroll to adjust the Mode number.
6
Press Enter to go back to the channel numbers.
To edit the channel numbers and levels of a selected Look:
1
Use the slide pad to access Look Store.
2
Press Enter then scroll to the desired Look.
3
Press Enter to access the memory data.
4
Scroll and select the channel number.
To edit the channel level:
1
Press Enter then use the slide pad to adjust the level (shown as 0-255).
2
Press Enter to toggle back to the channel numbers.
3
Press Enter and hold for 2 seconds to save the edited Look.
Color Span 2 User Manual
www.chroma-q.com
13
V1.1 October 2014

Advertisement

Table of Contents
loading

Table of Contents