Binatone WR1500N User Manual page 23

Step 2: For the configuration of the wireless adapter, please choose "Push the button on my
access point" in the configuration utility of the WPS as below, and click Next.
Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
Method Three:
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-3,
then the following screen will appear.
The WPS Configuration Screen of Wireless Adapter
The WPS Configuration Screen of Wireless Adapter
WR1500N 150Mbps Wireless N Router
- 17 -