Filtering System; Unloading The Dishwasher - Prima LPR661 Instruction Manual

Switch Off the Dishwasher
In the digital display appears 0 (remaining programme time),only in this case the programme has ended.
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.

Unloading the dishwasher

It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
The filter prevents larger remnants of food or other objects from getting inside the pump.
The residues may block the filter, in this case they must be removed.
2
1
3
- Inspect the filters for blocking after every time the dishwasher has been used.
- By unscrewing the coarse filter. you can remove the filter system. Remove any food remnants and clean the
filters under running water.
1
2
3
When following this procedure from step1 to step 3, the filter system will be removed;
NOTE：
when following it from Step 3 to Step 1, the filter system will be installed.
The filter system consists of a coarse filter, a flat (Main filter)
And a microfilter (Fine filter).
1
Main filter
Food and soil particles trapped in this filter are pulverized by a
special jet on the lower spray arm and washed down the
drain.
2
Coarse filter
Larger items, such as pieces of bones or glass, that could clog
the drain are trapped in the coarse filter. To remove an item
caught in this filter, gently squeeze the taps on the top of this
filter and lift it out.
3
Fine filter
This filter holds soil and food residues in the sump area and
prevents it from being redeposit on the dishes during a cycle.
step１：Turn the filter in anti-clockwise direction,
then lift it up
step２：lift the Main filter up
step 3： lift the Fine filter up
16