EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See "To select the external component to
EXT IN
use—
" on page 28.
1
Select the external component
(LINE IN).
TAPE
• If "LINE IN"* does not appear on the display,
see page 28 and select the external input
("LINE IN").
* Displayed only when one of the following sources is
selected—FM, AM, and TAPE.
Note on One-Touch Operation:
When you press TAPE CD-CH, the power
automatically comes on. You do not have to press
to turn on the power.
2
3
4
LINE IN*
Turn on the connected component
and start playing the source.
Adjust the volume.
Adjust the sound characteristics as
you want. (See pages 23 and 24.)
35