Connecting The Device / Usage - Delta Digital timer User Manual & Warranty

E43247 Digitale Zeitschaltuhr Innen Aldi UK.book Seite 12 Dienstag, 20. Juli 2010 3:07 15
ON
AUTO / ON
OFF
AUTO / OFF
X To return the timer switch to auto mode, press the M button until the display shows
ON AUTO / OFF
or
Resetting the timer switch
A reset restores the timer switch to its delivery condition. All settings and data entered are deleted.
X Use a pointed device (ball-point pen or similar) to press the R button.
Again enter time and date then, see as of page 6.

CONNECTING THE DEVICE / USAGE

ATTENTION
- Devices that may bear risks when being used without operator attention (e.g. terrace
heater, iron, fan feater, etc.) must not be connected to the switch.
- Devices with a power consumption of more than 13 amp (= 3.120 watt ohmic load) or
2 amp (= 460 watt inductive, e.g. motor-driven devices, transformers) must not be
connected.
1. Connect the timer switch to a mains outlet with earthing conductors whose voltage corresponds
to the "Technical data".
2. Insert the plug of the other device (aquarium pump, lamp, radio, etc.) into the outlet of the timer
switch.
3. Turn the connected device on.
12 HELPLINE No. U K / N.IRELAND 0800 328 6020 REP. IRELAND 00800 4467 5888
WEB SUPPORT info@dariolondon.com
The timer switch was switched on manually
The input activation and deactivation times are inactive,
z
the timer switch does not switch off automatically.
The timer switch was switched on automatically
The timer switch operates in accordance with the set activation and
z
deactivation times
The timer switch was switched off manually
The input activation and deactivation times are inactive,
z
the timer switch does not switch on automatically.
The timer switch was switched off automatically
The timer switch operates in accordance with the set activation and
z
deactivation times
.
AUTO /
GT-ZSd-02