Genway WL-03NL User Manual page 12

15. CM-03NZH Conformity Unit(4
16.
CM-03NHMC Management Unit
17.
CM-03NWD(A) Wall Phone
1 2 3 A
4 5 6 B
7 8 9 C
* 0 # D
18.
Network Switch For Audio system
POWER GND AF DATA POWER GND AF DATA GND AF DATA
WL-03NQH
NETWORK SWITCH
WL-03NQH2-162
NETWORK SWITCH
AO1+ AO1- AO2+ AO2- AI1+ AI1- AI2+ AI2- LA LB COM
WL-03NQH2-162 WL-03NQH
9
route way )
a)Working Voltage: V DC?2¡?0?
V DC6¡?0?
b)Standby Current:¡85mA
c)Working Current:¡500mA
a)Working Voltage:18V DC¡10%
b)Standby Current:¡120mA
c)Working Current:¡800mA
a)Working Voltage:18V DC¡10%
b)Standby Current:¡75mA
c)Working Current:¡350mA
a)Working Voltage:12V DC¡10%
b)Standby Current:¡55mA
c)Working Current:¡1mA00
3.How to adjust the tones£Uncover the door station.)
tone with the four holes.
1
2
ON DIP
1 2 3 4 5 6 7 8
Position ?£adjuster for the d
position 2£adjuster for the i
position 3£adjuster for the i
position 4£adjuster for the d
The back cover of the door station
11¡System operation
?.Video system operation£º
(1) Password to unlock the door station: Press *+ F4 , the door station will display
¡ ¡
Addr , input the room No.(3-digit or 4-digit), If the door station displays Pd-p ,
Please input password (the initialization passord is 1234), Then the door station displays
¡ ¡
Pass indicates successful unlock. If input the wrong room number, the door station
will display 'Err and shut down automatically. If you input the wrong unlock password, ¡ ¡
the door station will display Pd-p . If you input wrong unlock password more than five ¡ ¡
times at the same time, the door station will shut down automatically.
(Note: when the system operate in a network if users key a wrong password more
than 5 times at one time. then the door station will give an alarm to the management
unit automatically
Change unlock password: Put the Jb1 in the module to the SET position press
(2)
¡ *+ 3 + F3 , the door station displays Addr , input the room No. ( 3-digit or 4-digit), ¡
¡ ¡
door station displays Pd-p , input old unlock password, then door station displays
¡ Pd-n , please input new password, If the door station displays Pass , which ¡
indicates the unlock password successful change. If you input the wrong room NO and
password, the door station will display Err and shut down automatically. When
finished the setting, put the JB1 in the module to the COM position. ¡ ¡
) ( Door station call indoor phone in the same building: press * and input the room
No. that's all. For example: If you want to call NO. 102 family, when room number is
three digits: press Room No. 102 ; When room number is four digits, press Room ¡ ¡
¡ ¡
No. 0102 If the Room No. is right, the indoor phone will ring, the host can pick up
the handset to talk with the visitor. And the conversation time limit is 120 seconds.
When time is up, the door station will switch off automatically, if you want to continue
talking, please call again. If nobody answer the indoor phone, the door station (with
ring) begin to count down 30 seconds and after 30 seconds', the door station will shut
down automatically. If you input the wrong room number, the door station will display
¡ Err and shut down automatically. ¡
(£
3
4
oor station speech volume
ndoor phone ring volume
ndoor phone speech volume
oor station feed-back ring volume
¡ ¡
¡
¡ ¡ ¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡
42