Before Calling Service - AOC L26W661 User Manual

Envision series
Hide thumbs Also See for L26W661:
Table of Contents

Advertisement

BEFORE CALLING SERVICE

Please make these simple checks before calling service. These tips may save
you time and money since charges for receiver installation and adjustments of
customer controls are not covered under your warranty.
Symptoms
"Ghost " or double image
No power
No picture
Good picture but no sound
Good sound but poor color
Poor picture
Snowy picture and noise
Horizontal dotted line
Television not responding to
remote control
Items to Check and Actions to follow
*This may be caused by obstruction to the
antenna due to high rise buildings or
hills. Using a highly directional antenna
may improve the picture.
*Check that the TV's AC power cord is plugged
into the mains socket.
*Unplug the TV, wait for 60 seconds. Then re-
insert plug into the mains socket and turn on
the TV again.
*Check antenna connection at the rear of the
TV to see if it is properly connected to the TV.
*Possible broadcast station trouble. Try
another channel.
*Adjust the contrast and brightness settings.
*Check the Closed Captions setting. Some
TEXT modes could block the screen,
*Increase the VOLUME.
*Check that the TV is not muted; press the
MUTE button on the remote control.
*Adjust the contrast, color and brightness
settings.
*Sometimes, poor picture quality occurs when
having activated an S-VHS camera or
camcorder connected and having connected
another peripheral at the same time. In this
case switch off one of the other peripherals
*Check the antenna connection
*This may be caused by electrical interference
(e.g. hairdryer, nearby neon lights, etc.)
*Turn off the equipment.
*Check whether the batteries are working.
Replace if necessary
*Clean the remote control sensor lens on the
TV.
*You can still use the buttons at the front of
your TV.
*Select the TV mode to be sure your remote
control is in the TV mode.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents