Health Mate Far Infrared Sauna Owner's Manual page 8

10. Changing the Settings During Your Sauna Session
1. When sauna is turned on, inside light will light up
automatically. To turn off the light, simply press the
light button.
2. If you want to change the temperature during your
current session, Press Temp+ or Temp-. When your
sauna is in Celcius mode, temperature will change
by 1°C. In Farenheit mode, temperature will change
by 5°F.
3. If you want to change the session time during your
current session, simply press Time+ or Time-. Time
will change by 5 minutes.
4. If you want to turn off the sauna in the middle of
a session, press and hold the power button and your
sauna will turn off.
11. Using the Multi Color LED Light > see optional accessories on page 17
12. Error Codes
EO
EO: Temperature Sensor Disconnected.
ES
ES: Temperature Sensor Short Circuit.
IN CASE OF AN EO OR ES ERROR CODE, PLEASE CONTACT CUSTOMER SERVICE FOR FURTHER ASSISTANCE*
OHT
OHT: Inside Sauna Temperature is over the limit (180°F/82°C).
OHR
OHR: Inside of Controller is overheated (180°F/82°C).
OHT and OHR error will be resolved automatically. During OHT and OHR error, your sauna will automatically
shutdown and go into a cooldown period.
* Contact Information for Customer Service (PLH Products, Inc.) :
( )
• Toll Free Phone No. in the U.S.A. :
• Telephone No. :
• Fax No. :
• Email :
8 B. Getting Started
When your sauna session is over End will flash on
time display and you will hear 3 beeps. The sauna will
turn off automatically after 5 seconds.
(800) 946-6001
(714) 739-6600
(714) 739-6607
support@healthmatesauna.com
Time (not sauna session time) is not
displayed when your sauna is in
session. During your session you can only
see the countdown of your session time.
The Reserve and Clock button
are not functional when your
sauna is in session.