Table of Contents
Advertisement
Page Thirty:
FIRMWARE UPDATE
If you encounter difficulty reading or writing data
to the MP3 unit, you may need to update the
MP3 unit's firmware, or reformat the MP3 unit.
Follow the steps below to perform the update:
1. Connect the MP3 unit to the computer with the
included USB cable.
2. Your Radio should have come with a CD.
Insert that CD into your computer.
3. Find the file "KA1121MP3radioVxx.exe" and
double-click on it to start the update.
IMPORTANT: Do not disconnect the USB cable
while updating the firmware.
A pop-up menu will ask you "Do you want to
delete all the files on the storage device?" You
should select "Yes" to begin the update, or select
"No" to cancel the update. See the figure below:
4. Click "Confirm" to finish the update, then you
can disconnect the MP3 unit. (Be sure to use the
"Unplug or Eject Hardware" function)
NOTES:
If you have difficulty achieving a good connection
between the MP3 unit and your PC, you may
need to update the MP3 unit's firmware.
A. To reset the Radio and MP3 unit, take the
batteries out of both units. After one minute, they
will be reset.
B. If you still have difficulty connecting to your
PC, press and hold <Play/pause> along with any
other button on the MP3 unit, and connect the
unit to your PC. Release the buttons after
approximately 3 seconds, you should be able to
get a good connection to your PC.
C. If you still cannot connect, use the steps
above to update the firmware.
D. If you can connect the MP3 unit to your PC,
you can use the FAT32 format to reformat the
MP3 unit as a portable storage device.
Advertisement
Table of Contents
