9: Operating Errors; Description; Error Messages - Identipet MPR HS 5900L F Manual

9. Operating Errors

9.1 Description

The operating errors described below are errors that can occur during operation
of the Mini Portable Reader. These errors cause an error message to be dis-
played and at the same time the reader sounds three beeps. Fix each error
condition as described below. All messages are displayed for about 1 second.

9.2 Error Messages

LOW BATTERY
MEMORY ERROR
MEMORY FULL
SHUTDOWN
This message is a warning that the battery has been
discharged down to about 25% of its capacity and
should be replaced soon. After this message, the
left-most character of the display will blink until the
battery has been replaced.
A memory error has occured. Depending on the
problem, a file or all of memory may be unusable. If
possible, dump the memory to a computer or printer
to maintain a record. This message indicates an
errror in the file - if this message occurs again after
switching the reader off and then on again, please
consult your distributor.
There is no more room in the memory to store tag ID
codes. You will need to clear ID codes which are no
longer used to make room in the reader's memory
for additional ID codes to be stored. If necessary,
send some ID codes to your computer or printer and
then clear them from the reader's memory.
This message is displayed just before the system
shuts down due to a low battery. The memory
maintains stored information even when the battery
is fully charged.
Mini Portable Reader User Manual 21