Roland VG-99 Workshop Manual page 9

The "DOWN" and "UP" designations on the switches refer to when you
assign them to adjust a directional function, such as scrolling through
patches or adjusting the patch level. When making assignments to
them in the VG-99, the switches are simply called "GK S1" and "GK
S2."
On a guitar with a non-Roland divided pickup, the knob and switches may
be labeled differently, with names such as "synth volume" for the control
knob and "program up" and "program down" for the switches.
From Page 1 of the GK SETTING screens, press F2 to select the GK FUNC
screen. Here, you can select VG-99 parameters that are controlled by the GK
VOL knob and S1/S2 switches.
Turn the F1 knob or press the F1 button to set the desired GK VOL
1
behavior. Turn the F6 knob or press the F6 button to set the desired
S1 and S2 switch behavior.
•
OFF— This setting disables the GK VOL knob or S1/S2 switches.
•
ASSIGNABLE (PATCH)—
parameters) controlled are determined by settings made in
each patch.
•
A specific parameter—
used globally by all patches.
Press EXIT three times to return to the Play screen.
2
For a listing of all parameters that can be assigned to the GK VOL knob
and S1/S2 switches, see the VG-99 Owner's Manual.
The control orientation of the S1/S2 switches is affected by the setting
made in Step 9 of "Editing a GK Setting."
With this setting, the parameter (or
When a specific parameter is chosen, it's
The End
We hope you've found this workshop helpful. Keep an eye out
for other VG-99 Workshop booklets available for downloading at
www.RolandUS.com.
9