Panasonic Viera TH-P42V20A Operating Instructions Manual page 29

Menu Item
Intelligent
Frame
Creation
24p Smooth
Film
Resolution
Enhancer
Auto
Standby
Power Save
16:9
Overscan
Region
Select
Daylight
Saving Time
DVI Input
Setting
●
A different menu will be displayed when "Advance(isfccc)" in the Setup Menu is set to "On" or in the
mode of Media Player or Network service operations. (p. 34 and p. 44 - 60)
●
Only available items can be selected.
Adjustments / Configurations (alternatives)
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear (Off / On)
●
Set to "Off" if noise is generated on the screen.
●
This function is not available for selection (default to "Off") when "Viewing
Mode" is set to "Game" or in the mode of PC input, photo or Network
service operations.
Automatically compensates the picture frame rate to make the 24p source
movie images smooth (Off / On)
●
This is available only for 24p signal input and displayed instead of
"Intelligent Frame Creation".
●
This function is not available for selection (default to "Off") when "Viewing
Mode" is set to "Game" or in the mode of PC input, photo or Network
service operations.
Enhance the resolution of the image to make the image shaper
(Off / Mid / Max)
●
Not valid on PC, VIERA CAST and Media Player
●
You can set this function for each input.
Sets the time the TV automatically goes to Standby mode when no operation
is performed for the selected times (Off / 2 hours / 4 hours)
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going to Standby
mode.
Reduces brightness of picture to economise on power consumption
(Off / On)
Selects the screen area for displaying the image (Off / On)
On: Enlarges the image to hide the edge of the image
Off: Displays the image in the original size
●
Set to "On" if noise is generated on the edges of the screen.
●
This function is available when aspect is set to "16:9".
●
This function can be memorized separately for SD (Standard Definition)
and HD (High Definition) signals.
Selects the region where you live to adjust the standard time (NSW / ACT
/ Victoria / Queensland / South Australia / Western Australia / Northern
Territory / Tasmania) (p. 16)
Select time offset from the standard time for Summer Time
(Auto / Off / +1/2 hour / +1 hour) (p. 16)
●
Set to "Auto" normally.
Changes the black level in the image for HDMI input mode with DVI input
signal manually (Normal / Full)
●
When the DVI input signal from the external equipment, especially from
PC, is displayed, the black level may not be suitable. In this case, select
"Full".
●
The black level for HDMI input signal will be adjusted automatically.
29