Panasonic Viera TH-P42V20A Operating Instructions Manual page 27

Menu Item
SPDIF Selection
MPEG Optical
Level
HDMI1 / 2 / 3 / 4
Input
Reset Sound
Defaults
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset
PC Settings
H-pos
V-pos
Reset DVI
Position
Settings
Off Timer
USB HDD Setup
Child Lock
Favourites
Edit
Channel List
Auto Tuning
Manual Tuning Sets the TV channels manually (p. 32, 33)
Update
Channel List
New Channel
Message
Adjustments / Configurations (alternatives)
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal (Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
●
For Digital TV mode or Video mode (p. 48)
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT
terminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is louder comparing with the other types of audio track.
●
Digital TV mode only
Select to fit the input signal (Digital / Analogue) (p. 69).
Digital : HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
●
HDMI input mode only
Press the OK button to reset the present settings of Mode, Balance,
Headphone Volume, and Surround in Sound Menu to the default.
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Press the OK button to reset the present PC Setup settings to the default.
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the present DVI Position settings to the
default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
●
Register the connected USB HDD and makes the settings for the
recording (p. 40)
Locks a channel / AV input to prevent access to it (p. 36)
Creates list of favourite channels (Digital TV mode) (p. 31)
Skips the unwanted channels or edits channels (p. 31, 33)
Sets all Digital TV or Analogue TV channels automatically (p. 32, 33)
Updates the channel list with keeping your settings (Digital TV mode)
(p. 32)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (Off / On) (p. 32)
●
Set to the minimum level if noise occurs
27