Important Notes - ADEMCO LST700 Series Insallation & Maintenance Manual

LST700 SERIES FIRE ALARM PANEL

IMPORTANT NOTES

Items supplied with this panel
■ Installation & Maintenance Manual (i.e. this manual).
Explains how to install, commission and maintain the fire alarm control panel.
This manual must not be left accessible to the User.
■ User Manual / Log Book.
Gives detailed operational information, some of which will need to be referenced by the installation
engineer when setting-up the panel. Sections of this manual must be completed by the engineer
prior to system handover.
■ Torx key, for unfastening / securing the panel lid.
■ Electrical Accessory Pack, containing the following items:-
8 x 0.68µF 50V capacitors
4 x 6K8 0.25W resistors
1 x red battery lead
1 x black battery lead
1 x green battery jump lead
2 x nylon cable ties (for securing batteries into the panel enclosure)
2 x 003 access keys
System design
Fire alarm system design is beyond the scope of this document. A basic understanding of
general fire alarm system components and their use is assumed.
We strongly recommend that a suitably qualified and competent person is consulted in connection
with the design of the fire alarm system and that the system is commissioned and serviced in
accordance with the laid down specification and national standards. The fire officer concerned
with the property should be contacted at an early stage in case he has any special requirements.
We recommend you read AS1670.1 - 2004 (Fire detection, warning, control and intercom systems
- system design, installation and commissioning). The requirements of the BCA and local
regulations need to be taken into account where appropriate.
Equipment guarantee
This equipment is not guaranteed unless the complete system is installed and commissioned in
accordance with the laid down national standards by an approved and competent person or
organisation.
Technical support
For technical support and enquiries, contact Honeywell Technical Support on 1800 220 345.
4
This equipment must only be installed and maintained by a suitably skilled
and technically competent person.
THIS EQUIPMENT MUST BE EARTHED
This product has been manufactured in conformance with the
requirements of the Australian Communications Authority and all
N219
applicable EU Council Directives.
LST700 SERIES INSTALLATION & MAINTENANCE MANUAL • Approved Document No. DFU7002012 Rev 4