Advertisement
Operating and connecting an external device
You can connect external devices (Mp3 player ,CD player ,TV etc)
to the Speaker Bar in several ways.
Using a RCA audio cable
Make sure you match up the Red (R)and White (L)Audio connectors,
either RCA cable or line in/out cable only.
Using a 3.5mm line-in cable
You can also connect an external device to your Speaker Bar using
the LINE socket on the jack of the unit as shown .
To play the external device you will need to select LINE using the
LINE button.
Once the device is connected you can control playback as you
would usually.
Press the VOLUME + and - buttons on the music system to
increase or reduce the volume.
Press the MUTE button to turn the sound off, press it again to
return to the previous volume level.
15
Set up
Setting up your Speaker Bar
1.Plug the power cable into a standard three
pin wall socket and switch the
power on at the wall.
The remote control battery
1.It includes one piece of 2025 battery.
2.Remove the transparent sheet.
8
Advertisement
