Advertisement
3. Install the front panel as photo shown
7
8
4. Finally, fix it with 8 screws as photo shown
13
2
6
4
3
5
1
7.DC:DC jack in,the connection for mains adapter.
8.LINE:RCA and Line in jack.
9.Mounting hole.
Note:
Where a button that appears on both the speaker and remote
control is referenced in this guide you can use either button to use
that function.
To change your sound bar from 32" to 42"
1. At the rear cabinet,loosen screws (6 pcs is necessary) as photo
shown using a Philips screwdriver.
Only the screws indicated can be removed with the screw
! !
driver. Do not attempt to remove other screws as it will
spoil the sound
bar's operation.
10
Advertisement
