Sanyo EM-S1577W Instruction Manual page 13

8) Delay Start
Example: to start a cooking at 12:12.
(1) Set the cooking program wanted;
(2) Press " Clock/Pre-Set " to display the current clock. The hour figures flash:
(3) Press "1", "2", '1", '2";
(4) Press " Start/Speed Cook " to confirm the setting. The unit will turn back to
the clock state.
(5) Cooks begin when the time arrives.
Note: (1) If the setting is not within the range 0:00–23:59, the setting will be invalid;
(2) In the process of setting, if "STOP" is pressed or there is no operation within 1
minute, the unit will go back to the previous state automatically;
(3) The clock must be set before the delay start cooking. If the pre-set cooking has
not been programmed and only time to start cooking is set, the whole set will be
regarded as an alarm clock setting and 5 "beep" will be sound when the pre-set
time is reached.
9) Inquiring Function
(1) In one stage cooking state, press " Power Level ", the current microwave power will be
displayed for 3 seconds. After three seconds, the oven will turn back to the former state;
(2) In pre-set state, press " Clock/Pre-Set " to inquire the time for delay start cooking. The
pre-set time will be flashing in the LCD for 2-3 seconds, then the oven will turn back to
the clock display.
10). Fan Pro-longed Protection Function
If the cooking time is equal to or above 5 minutes, when the cooking ends, the microwave
operation will be stopped automatically, while the fan will be still working for 15 seconds.
11). Lock-out Function for Children
Lock: In waiting state, press " STOP " for 3 seconds, there will be a long "beep" denoting
entering into the children-lock state and LCD will display "
Lock quitting: In locked state, press " STOP " for 3 seconds, there will be a long "beep"
denoting that the lock is released.
12). Automatic Going Out Function
When the door is kept open, the oven light will be on and will go out automatically without
any operation for 10 minutes.
13). Cooking End Reminding Function
When cooking ends, there will be 5 "beep" which is reminding the completion of cooking.
14). Display Specification
(1) In waiting state, LCD will display clock and " : " will flash.
(2) In function setting state, LCD will display the related setting.
(3) In the operation and suspending state, LCD will display the residual cooking time.
(4) In the operation or suspending state or when the door is open, the flashing "Micro"
indicator will be lighted and the restarting indicator will be flashing.
12
".