PPU-700 Service Manual
3. DISASSEMBLY AND REASSEMBLY
Notes the following items when maintaining the printer.
• Do not disassemble, reassemble, or adjust the printer unnecessarily when the printer operation is satisfactory.
• Do not loosen the screws fixing each component carelessly.
• After finishing inspection, perform checking for normality before turning on the printer.
• Pay attention not to leave the part or screws used for maintenance inside the printer.
• When handling the print head and electronic components, pay attention to static electricity.
• When disassembling or reassembling the printer, check the wiring and cord for damage. Pay attention not to
lay the wiring and cord by force.
• Lubricate the components as necessary when reassembling them.
3.1 Tools Used
• Phillips screwdriver #0, #1, and #2
• Tweezers
• Long-nose pliers
• Oil brush
• Nipper
3.2 Disassembly Procedure
Disassembly procedure is explained in four categories: "Disassembly of Unit", "Disassembly of Feeder Unit",
"Disassembly of Moving Unit", and "Disassembly of Mechanism".
3.3 Reassembly Procedure
Reverse the procedure in "3.2 Disassembly Procedure".
3