Haier LEY22T1000HF Service Manual page 40

6). Channel tuning will commence. This operation may
take up to 6 minutes. The display will show the
progress of the tuning and the number of channels
found.
7). If you want to skip the ATV tuning, press the MENU
button to interrupt the tuning half way. A pop-up screen
will be displayed, press the
confirm. You will then go straight to DTV tuning. You
may repeat the above step if you also want to skip the
DTV tuning. An installation reminder will appear the
next time you turn on the TV.
8). After tuning is complete, the channels are arranged
in a preset order. If you wish to skip channels, modify
the preset order or rename channels, select P
Edit under the channel menu.
1 Programme(s)
Programme(s)
Programme(s)
Programme(s)
NOTE:
All the channels including ATV, DTV and Radio
can be tuning by one time,if the Tune Type is
DTV+ATV .
All the stored channels will be disappear after
auto tuning .
After auto tuning , the channel will skip to
the first DTV channel.
2. 1 DTV Manual Tuning (DVB-T)
1). Press the MENU button and then press the
buttons to select the CHANNEL menu and then
press the OK button.
2). Press the buttons to select DTV Manual Tuning
and then press the OK button.
CHANNEL
Auto Tuning
DTV Manual Tuning
PICTURE
SOUND
ATV Manual Tuning
Programme Edit
STIME
Signal Information
CI Information
OPTION
Software Update(USB)
LOCK
button to select YES to
rogramme
OK
MENU MOVE OK OK
3). The DTV Manual Tuning screen will pop up.
Press the
channel and then press the OK button to
commence the search of that channel. When the
signal has been tuned, the picture and signal
strength will be displayed on the screen.
4). Press the MENU button to return back to the
main menu.
5). Press the EXIT button to exit the menu.
2. 2 DTV Manual Tuning (DVB-C)
1). Press the MENU button and then press the
buttons to select the CHANNEL menu and then
press the OK button.
2). Press the
Tuning and then press the OK button.
CHANNEL
PICTURE
SOUND
STIME
OPTION
LOCK
3). The CADTV Manual Tuning screen will pop up.
Press the
(ks/s/QAM Type QAM) press the OK button to
commence the search of that channel. When the
signal has been tuned, the picture and signal
strength will be displayed on the screen.
4). Press the MENU button to return back to the
main menu.
5). Press the EXIT button to exit the menu.
- 37 -
buttons to select the desired UHF
D
buttons to select CADTV Manual
Auto Tuning
CADTV Manual Tuning
OK
ATV Manual Tuning
Programme Edit
Signal Information
CI Information
Software Update(USB)
OK
MENU MOVE OK
buttons to select(Frequency /Symbol
490000
16
NO SIGNAL