Panasonic Viera TH-L32XM6H Operating Instructions Manual page 5

2
Attach the TV to the pedestal
Carry out the work on a horizontal and level surface.
are
Secure the base to prevent the TV from falling over.
●
The place where the base is secured should be thick
enough and made of hard material.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1
Remove the assembly screws
2
Pull out the pedestal from the TV.
3
Remove the assembly screws
Inserting remote's batteries
Note the correct
polarity (+ or -)
TH-32_39_52XM_EM6H_EN.indd 5 TH-32_39_52XM_EM6H_EN.indd 5
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
from the TV.
from the bracket.
Press the hook and
lift the cover
Wall mounting the TV (optional)
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Rear of the TV (View from the side)
a
b
Screw for fixing the TV onto the
wall-hanging bracket (not supplied)
■
Holes for wall-hanging bracket installation
Models a
TH-L32XM6H 200 mm
TH-L39EM6H 200 mm
TH-L50EM6H 400 mm
■
Screw specification
Models Type
TH-L32XM6H M6
TH-L39EM6H M6
TH-L50EM6H M6
Warning
●
When optional accessories such as wall brackets etc.
are used, always read and follow the manufacturer
installation and usage instructions.
●
Do not mount the unit directly below ceiling lights (such
as spotlights or halogen lights) which typically give
off high heat. Doing so may warp or damage plastic
cabinet parts.
●
When installing wall brackets you must ensure the wall
bracket is not electrically grounded to metal wall studs.
Always ensure that there are no electrical cables,
pipes etc. in the wall before you begin the wall bracket
installation.
●
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
Depth of
screw
b
100 mm
200 mm
400 mm
Depth of screw
Minimum Maximum
23 mm 24 mm
19 mm 20 mm
21 mm 23 mm
5
2/1/2013 2:19:21 PM 2/1/2013 2:19:21 PM