Table of Contents
Advertisement
Model 7414A
Section III
Operation
1. UNWRAP PAPER and remove cardboard. Make sure highest odd
number is on top of pack.
2. PULL PAPER TABLE OUT AT BdTTOM.
3. LOWER IT SLOWLY. It must be fully horizontal.
4. SLIDE PAPER PACK INTO FEED TRAY while compressing paper,
and pulling top sheet out.
6. CLOSE PAPER TABLE, pulling down slightly on paper. Press table
in firmly so it locks in place.
Note that tab on takeup tray
catches in hole on case lip.
9. IF RECORDER IS IN A CART OR A CABINET, PULL OUT
PAPER TAKEUP DRAWER. Odd-numbered sheet should be first
into drawer.
8. IF RECORDER IS IN A CASE, IN TALL TAKEUP TRAY. Note
that an odd-numb
red
sheet should b first onto tray.
Figure 3-2. Paper Loading Procedure
07414-1
3-3
Advertisement
Table of Contents
