ATN XTV 106 User Manual page 5

Page 5 of 35
A Closer View for the back panel of the receiver: The connection on the left corner is used to connect to
an external infrared remote control extender if needed.
A Closer View for the Front panel of the receiver:
To know the status of the receiver, check the power/ (on-off-standby) indicator as shown in the
screenshot below:
If the On/off/Standby indicator is red, this means that the receiver is not active.
If the receiver stands on one channel for more than 4 hours, the receiver goes into standby mode.
During stand-by mode, the TV screen goes black but the on/off/standby indicator is still green, this
means that the receiver is in stand-by mode. If that indicator is red, this means that the receiver is off,
and needs to be turned on by pressing the red button on the remote control to bring the receiver back-
on, or turning off then on the switch from the back, this will reboot the receiver and goes into active
again displaying channel "1" from the "Channels" menu.