Please Note - Phottix Odin TTL Instruction Manual

Please Note

After turning on the Phottix Odin TCU and
receivers, slave mode does not need to be set
on ashes on Phottix Odin receivers, but ashes
need to be set in TTL mode, Flash Zoom needs
to be set to Auto and AF ILL to ON (see your
ash manual for details).
Ensure there is a good hot shoe connection
between the TCU and camera, and ashes and
receivers for best performance.
Many TTL ashes have been tested but the
manufacturer cannot guarantee that all third
party TTL ashes will function properly with the
Phottix Odin. It has been designed and
optimized for original Nikon ashes using the
i-TTL system. Issues with third party ashes will
not be supported.
4
Tips:
Turn o all devices – ashes/strobes,
cameras, and the Phottix Odin TCU and
receivers - when connecting and disconnect-
ing devices.
Upgrading rmware by USB
The rmware of the TCU and receivers can be
upgraded using the included USB cable. Any
upgrades and full instructions will be
announced on the Phottix Blog
(journal.phottix.com).