Trixter Matrix Bike Owner's Manual page 33

Safety
o The X-Bars™ Handlebar System mechanism is enclosed to minimize the
possibility of contact with moving parts.
o The Grip-Shift™ position on the handlebars allow the rider to maintain hands and
grip in their assumed riding position for comfort, safety and non-interruption to the
exercise routine.
o X-Bars™ System buffered end stop within the mechanism to provide smooth
transition between left and right body movement ensuring no body injury.
o Hi-grip compound bar end covers to provide excellent hand grips at the outermost
point of the handlebars.
o 28" (700mm) wide base feet for added stability and safety have been fully tilt-table
tested.
o Non-slip rubber cushions under the leveller feet to ensure no bike movement, even
when bike is vigorously worked.
o Freewheel mechanism as per standard bicycle ensuring safer cycling with the
absence of the inertia of a fixed flywheel.
o Double-sided pedals giving the 2 safe options of either toe clips or shoe clips.
Style & Comfort
o Highly attractive and futuristic curved monocoque X-Bike™ Frame built from
round and elliptical tubular steel.
o 3 Tone, corrosion-resistant, zinc plated and powder coated metallic paint system
with added protective and cosmetic enhancing clear lacquer coating system for
unrivalled presentation and corrosion resistance.
o Integrated moving covers system displaying working geometry.
o Stylish front fender enhancing X-Bike's™ look and keeping the corporate curved
image throughout.
o Contoured highly cushioned seat – male and female for maximum comfort
o Rider controls are all conveniently located, simple to use and allow for maximum
rider comfort and non-interrupted X-Biking™ Ride.
Protection
o Paint system – as above with the added benefit of accepting all conventional
cleaning materials.
o Sweat protection – All covers and general X-Bike features are specifically designed to
channel sweat away from sensitive areas.
o Rubber seals provided at all points directly within the sweat zone ensuring no sweat
ingress to the working mechanisms.
o Easily replaceable plastic covers on the handlebars and frame to protect your
investment.
o Plastic kick-plate cover to protect the frame paintwork when mounting and
dismounting the X-Bike™ Indoor Cycle.
o Front flywheel fender to channel sweat away from sensitive areas including moving
parts and V-Brake system.
o V-Brake mechanism is fitted below the flywheel, well out of sweat zone for
increased longevity and ease of maintenance.
o Chain guard to protect the moving drive parts.
o Full seam rubber seals around the chain guard to keep corrosive sweat away from
moving parts inside.
o Protective plastic caps on 4 corners of base legs.
30