Specification - ViewSonic VP2030b-1 Service Manual

2. Specification

GENERAL specification
Test Resolution & Frequency
Test Image Size
Contrast and Brightness Controls
VIDEO INTERFACE
Input Connector (refer the appendix A)
Default Input Connector
Video Cable Strain Relief
Video Cable Connector DB-15 Pin out
Video Signals
Video Impedance
Maximum PC Video Signal
Maximum Mac Video Signal
Sync Signals
DDC/CI
Sync Compatibility
Video Compatibility
Resolution Compatibility
Exclusions
Viewsonic Corporation
1600x1200 @ 60Hz
Full Size
Factory Default:
Contrast = 70%, Brightness = 100%
D-Sub = DB-15 (Analog)
DVI-A = DVI-I (Analog)
DVI-D = DVI-I (Digital)
Defaults to the first detected input
Equal to twice the weight of the monitor for
five minutes
Compliant DDC/CI
Video RGB (Analog)
Separate Sync / Composite Sync / SOG
TMDS (Digital)
75 Ohms (Analog), 100 Ohms (Digital)
950 mV with no damage to monitor
1250 mV with no damage to monitor
TTL
Compliant with Revision 1.0
Separate Sync / Composite Sync / SOG
Shall be compatible with all PC type
computers, Macintosh computers, and after
market video cards
640 x 350, 640 x 400, 640 x 480, 720 x 400,
720 x 480, 720 x 576, 800 x 600, 832 x 624,
1024 x 768, 1152 x 864, 1152 x 870, 1280 x
720, 1280 x 768, 1280 x 960, 1280 x 1024,
1360 x 768, 1400 x 1050, 1440 x 900, 1600 x
1200, 1680 x 1050, 1920 x 1080, 1920 x 1200
Not compatible with interlaced video
4 Confidential - Do Not Copy VP2030b-1