ViewSonic VP2030b-1 Service Manual page 15

Sharpness adjusts the clarity and focus of the screen image. This feature is disabled when the input signal is
1600x1200@60Hz analog signal.
Scaling features are explained below:
Fill All - the signal will be displayed on the whole screen and wide signal will be adjusted to 4:3 ratio.
Fill Aspect Ratio – the width of the signal will fit the screen horizontally while the vertical directions may
not fit the screen (if the input is wide signal)
1:1 – the signal will be displayed on the center of the screen with 1:1 ratio. This means you may see the
signal at the center of the screen while it is surrounded by black area.
G. Setup Menu controls are explained below:
Language allows you to choose the language used in the menus and control screens.
Resolution Notice displays the recommended resolution for this LCD display.
OSD Timeout sets the length of time an on-screen display screen is displayed. For example, with a"15
OSD Position allows you to move the on-screen display menus and control screens.
H. Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset
Timing Mode listed in this user guide.
Viewsonic Corporation
Enable allows the Resolution Notice to appear on-screen.
Disable will not allow the Resolution Notice to appear on-screen.
second" setting, if a control is not pushed within 15 seconds, the display OSD disappears.
12 Confidential - Do Not Copy VP2030b-1