Apply Power - SonicWALL TZ 190 Wireless User Manual

2. Insert your WWAN PC card "face up" into the PC CARD slot on the left side
of the SonicWALL TZ 190 Wireless appliance. The card should sit firmly in
place.

Apply Power

1. Connect the AC plug to the power supply.
2. Plug one end of the power supply to the back of the SonicWALL TZ 190
Wireless.
3. Connect the AC plug to an appropriate power outlet.
3 2 1 Power
The Power LED on the front panel lights up green and the Test
lights up and blinks while the appliance performs a series of diagnostic tests.
wwan wlan wan opt
signal on/act
link/act WiFiSec
SonicWALL TZ 190 Wireless Getting Started Guide
link/act
TZ 190
10/100
wireless
To AC power
LED
Page 33