E-Mu PROTEUS FX Operation Manual page 77

MODULATION SOURCES:
PITCH WHEEL,
MIDI CONTROL A,
MIDI CONTROL B,
MIDI CONTROL C,
MIDI CONTROL D,
MONO PRESSURE,
POLYPHONIC PRESSURE,
LFO 1, LFO 2,
AUXILIARY ENVELOPE
DESTINATIONS:
PITCH, PRIMARY PITCH,
SECONDARY PITCH,
VOLUME, PRIMARY VOLUME,
SECONDARY VOLUME,
ATTACK, PRIMARY ATTACK,
SECONDARY ATTACK,
DECAY, PRIMARY DECAY,
SECONDARY DECAY,
RELEASE, PRIMARY RELEASE,
SECONDARY RELEASE,
CROSSFADE,
LFO 1 AMOUNT,
LFO 1 RATE,
LFO 2 AMOUNT,
LFO 2 RATE,
AUX. ENVELOPE AMOUNT,
AUX. ENVELOPE ATTACK,
AUX. ENVELOPE DECAY,
AUX. ENVELOPE RELEASE
WHEN MODULATING
ENVELOPE ATTACK,
DECAY OR RELEASE
TIMES:
POSITIVE AMOUNTS OF
MODULATION INCREASE
THE TIME.
NEGATIVE AMOUNTS OF
MODULATION DECREASE
THE TIME.
EDIT MENU
REALTIME MODULATION CONTROL
These functions allow you to route
realtime controllers to any of the modula-
tion destinations on Proteus FX except
Tone, Sample Start, and Pan. Up to 8
simultaneous patches may be pro-
grammed. For each modulation patch,
there is a source and a destination
parameter. Place the cursor under the
appropriate parameter and change the
patch number, modulation source or
modulation destination using the data
entry control. If a parameter is not
labeled either primary or secondary, it
will affect both.
REALTIME CTL
1 LFO1 ->Pitch
75