JVC KD-LH70R Instructions Manual page 45

3
Start searching for an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service (either primary or
secondary) you want to listen to.
Press ∞ (down) to select the previous
service (either primary or secondary).
Press ¢
to search
for ensembles of higher
frequency.
Press 4
to search
for ensembles of lower
frequency.
Press 5 (up) to select the
next service. (If a primary
service has some
secondary services, they
are selected before the
next primary service is
selected.)
To change the display information while
tuning in to an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press D (DISP).
Each time you press the
button, the following
information appears for a while
on the display.
Service name
Ensemble name
Channel number
To tune in to a particular ensemble without
searching
Before you start....
Press FM/AM (DAB) briefly if CD, CD changer, or
external component is the current source.
1
Press and hold FM/AM (DAB) to select DAB
tuner as the source.
2
Press FM/AM (DAB) repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
Press and hold ¢
3
than one second.
Press ¢ or 4
4
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
Press 5 (up) or ∞ (down) to select a service
5
(either primary or secondary) you want to
listen to.
To restore the FM/AM tuner
Press and hold FM/AM (DAB) again.
Frequency
or 4
for more
repeatedly until the
45