SMA BLUETOOTH REPEATER Installation Manual
Device for closing dead zones with bluetooth wireless technology
Hide thumbs
Also See for BLUETOOTH REPEATER:
- Installation manual (32 pages) ,
- Installation manual (28 pages) ,
- Installation manual (32 pages)
Subscribe to Our Youtube Channel
Related Manuals for SMA BLUETOOTH REPEATER
Summary of Contents for SMA BLUETOOTH REPEATER
- Page 1 Device for Closing Dead Zones with ® SMA Bluetooth Wireless Technology SMA BLUETOOTH REPEATER Installation Manual BTRPIN-IA-eng-IUS113911 | 98-0045411 | Version 1.1...
-
Page 3: Table Of Contents
Selecting the Mounting/Installation Location ....15 Mounting the SMA Bluetooth Repeater ....17 Electrical Connection . - Page 4 Technical Data ........27 SMA Bluetooth Repeater ......27 11.1...
- Page 5 All such warranties are expressly disclaimed. Neither SMA America, LLC nor its distributors or dealers nor SMA Solar Technology Canada Inc. nor its distributors or dealers shall be liable for any indirect, incidental, or consequential damages under any circumstances.
-
Page 6: Important Safety Instructions
SMA equipment and/or other equipment connected to the SMA equipment or personal injury. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. - Page 7 SMA America, LLC Important Safety Instructions Other Symbols in this document In addition to the safety and hazard symbols described on the previous pages, the following symbol is also used in this manual: Information This symbol accompanies notes that call attention to supplementary information that you must know and use to ensure optimal operation of the system.
- Page 8 All installations must conform with the laws, regulations, codes and standards applicable in the jurisdiction of installation. SMA assumes no responsibility for the compliance or noncompliance with such laws or codes in connection with the installation of the product.
-
Page 9: Information On This Manual
Information on this Manual Validity This manual is valid for the SMA Bluetooth Repeater, firmware version V 0.18R, and higher. This manual does not contain any information on connected devices. Detailed information on connected devices is provided in the device manuals. -
Page 10: Safety
Any other use can result in personal injury or property damage. The enclosed documentation is an integral part of this product. • For correct and optimum use of the SMA Bluetooth Repeater, read and follow the instructions in this documentation. -
Page 11: Safety Instructions
SMA America, LLC 2 Safety 2.3 Safety Instructions Risk of lethal electric shock Death or serious injury due to high voltages is possible. • Prior to performing any work on the inverter, disconnect the inverter on the AC and DC sides (see inverter installation manual). -
Page 12: Product Description
SMA America, LLC Product Description 3.1 Applications Under unfavorable installation conditions, the SMA Bluetooth Repeater is used to bridge dead zones between SMA Bluetooth devices or to improve poor wireless connections. Example for the use of the SMA Bluetooth Repeater Figure 1:... -
Page 13: Device Overview
* Power Modul is not available in USA or Canada. In USA and Canada, mains connection can only be effected via the plug-in power supply. 3.4 Identifying the SMA Bluetooth Repeater You can identify the SMA Bluetooth Repeater from the type label. The type label can be found on the right-hand side of the SMA Bluetooth Repeater. Installation Manual... -
Page 14: Scope Of Delivery
Quantity Designation SMA Bluetooth Repeater Bracket for wall mounting or top-hat rail mounting (can be found on the rear side of the SMA Bluetooth Repeater on delivery) Screw Screw anchors 2-pole plug for connection of power supply via the Power Modul*... -
Page 15: Mounting Or Installing
SMA America, LLC 5 Mounting or Installing Mounting or Installing You have the option or either installing or mounting the SMA Bluetooth Repeater. 5.1 Selecting the Mounting/Installation Location Observe the requirements for the mounting/installation location: ☐ The mounting/installation location is indoors. - Page 16 1. Decommission the plant (see the manual of the inverter and of the communication product). This will ensure that the SMA Bluetooth Repeater is integrated into the SMA Bluetooth network at the point where the dead zone is located, thus improving the Bluetooth connection at that point.
-
Page 17: Mounting The Sma Bluetooth Repeater
SMA America, LLC 5 Mounting or Installing 5.2 Mounting the SMA Bluetooth Repeater You can mount the SMA Bluetooth Repeater either on the wall or on a top-hat rail. Mounting the SMA Bluetooth Repeater on the wall Mounting accessories required: • 1 Bracket •... - Page 18 • 1 Bracket 1. Lift the bracket via the strap and pull it out of the guide on the rear side of the SMA Bluetooth Repeater until it snaps into place. The bracket now slightly protrudes over the enclosure edge.
-
Page 19: Electrical Connection
Technically unsuitable plug-in power supplies may cause a short circuit or fire. • Use the plug-in power supply included as an accessory for the SMA Bluetooth Repeater. 1. Connect the country-specific socket-outlet adapter to the plug-in power supply; it snaps into place when inserted correctly. -
Page 20: Settings
• A maximum of 2 Sunny Beams of type BEAM-BT-11.GR1 In all other cases you must determine a free NetID (see Sunny Explorer Help* ). * Sunny Explorer is a free software from SMA. You can obtain the Sunny Explorer in the download section of www.SMA-America.com. -
Page 21: Maintenance And Care
– If external damage to the SMA Bluetooth Repeater is severe enough to impair correct function, replace the SMA Bluetooth Repeater. – If the SMA Bluetooth Repeater is soiled, wipe it clean with a moderately damp cloth. Any cleaning agents used must be non-abrasive and non-corrosive. -
Page 22: Decommissioning
1. Push the SMA Bluetooth Repeater upwards and use a screwdriver to press it against the bracket. 2. Slide the SMA Bluetooth Repeater upwards and out of the bracket. 3. Remove the screw from the wall and remove the bracket. -
Page 23: Disposing Of The Sma Bluetooth Repeater
– Use packaging which adequately protects the device from damage during transport. Hint: If available, use the original packaging. – Send the SMA Bluetooth Repeater back to SMA at your own expense and marked with the information "FOR DISPOSAL". Installation Manual... -
Page 24: Troubleshooting
If the socket-outlet is supplying voltage, either the plug-in power supply or the SMA Bluetooth Repeater itself is defective. – Replace the plug-in power supply. Use only the plug-in power supply included as an accessory for the SMA Bluetooth Repeater. -
Page 25: Connection Signal
10 Troubleshooting 10.2 Connection Signal The SMA Bluetooth Repeater can only display a connection signal if it is integrated in an existing SMA Bluetooth network. The SMA Bluetooth network can only be established by master devices* . Devices will always display the connection signal to the device from which the connection has been established. - Page 26 10 Troubleshooting SMA America, LLC Bluetooth LEDs Status Measure Blue LED Yellow LEDs Connection signal The SMA Bluetooth Repeater • Contact the firmware is defective. SMA Serviceline. Flashing 3 LEDs flashing and "RDY" LED flashing green BTRPIN-IA-eng-IUS113911 Installation Manual...
-
Page 27: Technical Data
SMA America, LLC 11 Technical Data 11 Technical Data 11.1 SMA Bluetooth Repeater General data 1⁄ Width x height x depth in. x 1 ⁄ in. x 3 in. (142 mm x 40 mm x 76 mm) Weight ⁄ oz. (144 g) -
Page 28: Plug-In Power Supply (Cincon, Trg30R 120)
11 Technical Data SMA America, LLC Communication Bluetooth Inverter Bluetooth Data logger Range in open air ≤ 328 ft. ( ≤ 100 m) 11.2 Plug-in Power Supply (CINCON, TRG30R 120) Mechanical data Width x height x depth in. x 2 ⁄... -
Page 29: Compliance Information
• Consult the dealer or an experienced radio/TV technician for help. The user is cautioned that changes or modifications not expressly approved by SMA America, Inc. could void the user’s authority to operate this equipment. IC Compliance Information This device complies with Industry of Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: •... -
Page 30: Contact
SMA America, LLC 13 Contact If you have technical problems concerning our products, contact the SMA Service Line. We require the following information in order to provide you with the necessary assistance: • Type, serial number and firmware version of the inverter •...
Need help?
Do you have a question about the BLUETOOTH REPEATER and is the answer not in the manual?
Questions and answers