General Instrument DSR-4800 Operating Manual page 3

Commercial integrated receiver decoder
Hide thumbs Also See for DSR-4800:
Table of Contents

Advertisement

Safety Considerations
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense. This digital apparatus does not exceed the Class A
limits of radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
MULTIPLE VOLTAGE EQUIPMENT:
The power cord included with your unit is for use with standard 125V AC supplies. If it is necessary to
operate the product in the U.S.A. with a 220V AC supply, then a UL-Listed power cord must be used and
the internal power supply jumper must be set. For countries outside the U.S.A. it is required to use a
power cord that complies with the electrical standards established by that country.
See IMPORTANT SAFEGUARDS for additional safety instructions.
iii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr-4801Dsr-4850Dsr-4810

Table of Contents