Federal Communications Commission (Fcc) Statement - Magnavox MAT976KB Manual

Federal Communications Commission (FCC) Statement

This equipment complies with Part 68 of the FCC rules. On the back of this equipment is a
label that contains, among other information, the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment. You must, upon request, provide this infor-
mation to your telephone company. The REN is useful to determine the quantity of devices
you may connect to your telephone line and still have all of those devices ring when your
telephone number is called. In most, but not all areas, the sum of the RENs of all devices
connected to one line should not exceed five. To be certain of the number of devices you
may connect to your line as determined by the REN, you should contact your local tele-
phone company to determine the maximum REN for your calling area.
If your telephone equipment causes harm to the telephone network, the telephone company
may discontinue your service temporarily. If possible, they will notify you in advance. But, if
advance notice is not practical, you will be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations or proce-
dures that could affect the proper functioning of your equipment. If they do, you will be noti-
fied in advance to give you an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this telephone equipment, please contact the repair facility at
Philips Service Solutions Group, P.O. Box 555, Old Andrew Johnson Highway, Jefferson City,
TN 37760, for more information on obtaining service or repairs. The telephone company
may ask that you disconnect this equipment from the network until the problem has been
corrected or until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs.
This device is equipped with an RJ11 connector.
CAUTION: Changes or modifications to this equipment not expressly approved by Philips
could void the user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
6