For Wall Mounting - Walker Ameriphone XL-30 Operating Instructions Manual

Setting up Your XL-30
(continued)
Line cord
Figure 4 - Connecting the Components

For Wall Mounting

1. Pull the handset hook out as
shown in Figure 5 and
reverse its position so that the
hook points up and will hold
the handset when you hang
up.
Figure 5 - Reversing the Hook
2. Insert the tabs of the phone
base into the slots in the
5
hanset
(curling cord)
lower position of the base as
shown in Figure 6. Push the
mounting bracket in and
down firmly until it snaps into
place.
Figure 6 - Mounting Bracket for Wall
Mounting
3. Locate a desired wall phone
jack and hold phone upright.
4. Plug in the short phone line
cord and mount the phone
as shown in Figure 7.
Figure 7 - Wall mounting installation
Short phone
line cord