Table of Contents
Advertisement
Chapter 2 Hardware Configuration
2-16. CLEAR CMOS DATA SELECTION
JP7 : Clear CMOS Data Selection
The selections are as follows :
FUNCTION
Normal
Clear CMOS
*** Manufacturing Default is set as Normal.
Note: To clear CMOS data, user must power-off the computer and set the jumper
to "Clear CMOS" as illustrated above. After five to six seconds, set the
jumper back to "Normal" and power-on the computer.
2-17. CPU FAN CONNECTOR
JCFAN1 : CPU Fan connector
The pin assignment is as follows:
PIN
1
2
3
Page: 2-14
JUMPER SETTING
(pin closed)
ASSIGNMENT
GND
+12V
FAN1
ILLUSTRATION
1-2
2-3
PMB-472LF USER
JUMPER
'
S MANUAL
Advertisement
Table of Contents
